Yamaha FJR13AEV(C) Service Manual page 107

1. Wire harness
2. ECU (engine control unit)
3. ABS ECU (electronic control unit)
4. Tail/brake light
5. Rear turn signal light
6. Tail/brake light assembly lead
7. License plate light lead
8. Seat lock cable
9. Hydraulic unit breather hose
10. Stator coil lead
11. Rear shock absorber spring preload adjusting
cable
12. Rectifier/regulator
13. Rectifier/regulator lead
14. Brake hose (hydraulic unit to metering valve)
15. Hydraulic unit
16. ABS wire harness
17. Rear wheel sensor lead
18. Rear brake light switch lead
19. Brake hose (front brake master cylinder to
hydraulic unit)
20. Brake hose (hydraulic unit to front brake calipers)
21. Brake hose (rear brake master cylinder to
hydraulic unit)
22. Brake hose (hydraulic unit to proportioning valve)
A. Pass the license plate light lead through the hole in
the rear fender.
B. Route the wire harness to the inside of the seat
lock cable.
C. Route the stator coil lead and rectifier/regulator
lead to the outside of the rear shock absorber
spring preload adjusting cable and under the
hydraulic unit breather hose.
D. Pass the stator coil lead, rectifier/regulator lead,
and hydraulic unit breather hose through the guide
on the frame, making sure to route the hose to the
outside of the leads.
E. Fasten the leads (to ABS wire harness and rear
brake light switch) that branch off from the wire
harness with the holder.
F. When installing the ABS ECU, be sure not to pinch
the rear wheel sensor lead and ABS wire harness
between the ABS ECU and the rear fender.
G. Route the rear right turn signal light lead under the
right tail/brake light bulb socket.
H. Route the tail/brake light assembly lead between
the left tail/brake light bulb socket and the
mounting boss on the tail/brake light assembly.
I. Route the rear right turn signal light lead and right
tail/brake light lead over the left tail/brake light bulb
socket.
J. Route the leads between the left tail/brake light
bulb socket and the rear left turn signal light bulb
socket.
K. Route the tail/brake light assembly lead between
the tail/brake light assembly and its bracket.
CABLE ROUTING (FJR13A)
2-58