True Motion Reset - Furuno FMD-3200 Operator's Manual

2.7

True Motion Reset

In the true motion mode, the chart is stationary and own ship moves on the screen.
With TM reset active, own ship moves until it reaches the true motion reset border-
line(s), then the chart is redrawn and own ship jumps back to an opposite position on
screen based on its course. (This resetting can also be done manually by clicking the
[TM/CU Reset] button.) When the TM reset function is active, "TM/CU Reset" appears
at the right side of the display.
OWN SHIP
How to enable, disable automatic TM reset
To enable automatic TM reset, click the [TM Reset off] indication at the right side of
the display to show [TM/CU Reset].
Click
When the TM reset is disabled, change the chart scale with the scrollwheel and scroll
the chart by drag and drop. The own ship information box shows [TM Reset off]. When
own ship moves off the screen the box shows [Ship off screen].
How to set the true motion reset borderline
You can set the limit for TM reset (in percentage) on the [Basic Setting] page. See
section 4.2.2.
TM reset borderline setting
(Ring does not appear on the display.)
TM
Reset
2. OPERATIONAL OVERVIEW
OWN SHIP
2-19