Furuno FMD-3200 Operator's Manual page 74

3. HOW TO MANAGE CHARTS
4. When the installation is completed, information about the installation appears in
the [Error/Warning/Guidance] window. Click the [Confirm] button to finish.
5. If applicable, set the next sequential medium then repeat steps 2-4 to install the
next charts.
Note 1: When many charts are installed, the ECDIS checks for error in the installed
data at the next power up. This is not an indication of malfunction.
Note 2: If, after installation, no ARCS chart appears, delete all ARCS charts and then
reinstall them.
3-8