How To Set The Conditions For Logging Danger Targets - Furuno FMD-3200 Operator's Manual

Electronic chart display and information system, ecdis

Hide thumbs Also See for FMD-3200:

Table of Contents

19. RECORDING, PLAYBACK FUNCTIONS

How to set the conditions for logging danger targets

The operator may set Closest Point of Approach (CPA), Time to CPA (TCPA) and Log

interval for viewing dangerous TT and AIS targets on the ECDIS display.

1. Open the menu and select the [Danger Targets] page from the [Danger Target]

2. Set how often to record dangerous TTs and AIS target with [Log interval]. The set-

ting range is 1 to 100 (min.).

Fmd-3300 Fmd-3200-bb