How To Adjust The Display Brilliance (Furuno Or Hatteland Monitor); Manual Brilliance Adjustment - Furuno FMD-3200 Operator's Manual

1.8 How to Adjust the Display Brilliance (FURUNO or
Hatteland monitor)
The brilliance setting is defined according to the color palette setting. However, man-
ual adjustment of the brilliance is also possible.
Note 1: The brilliance of only the FURUNO or Hatteland monitor can be adjusted from
the Control Unit. Use a serial cable for brilliance adjustment to make the connection
between the Processor Unit and the Control Unit.
Note 2: For how to adjust display brilliance from the Hatteland monitor, see its opera-
tor's manual.
Note 3: Improper brilliance may affect the visibility of information, especially on the
night display.
1.8.1

Manual brilliance adjustment

Manual adjustment with the BRILL control on the ECDIS control unit
Operate the BRILL control to adjust brilliance. Turn it clockwise to increase the bril-
liance; counterclockwise to decrease the brilliance. Watch the brilliance level indica-
tion on the [BRILL] button (see the illustration below) to see the current brilliance level.
Manual adjustment with the InstantAccess knob
1. Push the InstantAccess knob.
2. Rotate the knob to select the [BRILL] button then push the knob to show the bril-
liance adjustment window.
[BRILL]
button
3. Push the knob, rotate the knob to set the brilliance then push the knob to confirm
the setting. The calibration state indication changes to "UNCALIB".
4. Rotate the knob to select the [CALIB] button then push the knob to calibrate the
brilliance. The calibration state indication changes to "CALIB".
Current brilliance level
Calibration state
(CALIB or UNCALIB)
1. INTRODUCTION
[CALIB]
button
1-7