Furuno FMD-3200 Operator's Manual page 211

Default
Symbol
color
Green
Green
Green
Green
Green
Green
Green
Green
ABC
Red
ABC
Note 1: The equipment continues to process AIS targets when the AIS feature is
switched off. When the AIS is again turned on, symbols are immediately displayed.
Note 2: AIS symbols are momentarily erased after the screen is redrawn when the
heading is changed from the Head-up mode.
Note 3: When no AIS data is received, the Alert 380 "AIS COM Error" appears in the
[Alert] box. Check the AIS transponder.
Note 4: A target is declared a lost target if it is not detected in five consecutive report-
ing periods.
Note 5: The color of the AIS symbols can be changed. See section 13.2.2.
Name
No heading/COG target
Heading-turn indicator
AIS ATON
Virtual AIS ATON
SAR-AIRCRAFT
AIS base station
AIS SART
AIS select symbol
AIS lost symbol
14. AIS TARGET FUNCTIONS
Description
AIS symbols are shown in a broken lines
in the following cases:
• No water or ground tracking speed of
your ship, or there is no speed data. All
AIS symbols are shown in broken lines.
• No speed data from AIS target. The
symbol of the corresponding
is shown in broken lines. A target with
neither a reported heading nor COG is
oriented toward the top of the
al display area.
Shows target's direction of turning.
Aids to navigation
Denote virtual AIS
Target selected to display its data.
X is superimposed on the AIS target sym-
bol and is flashing.
AIS target
operation-
14-3