System Information; User Reset - Furuno FE-800 Operator's Manual

2.11

System Information

The system information display shows information about your FE-800 unit and the transceiver(s)
connected to it. The figure below is an example of the information screen.
1. Press the MENU/ESC key to open the Main menu.
2. Select [System] using
3. Select [Information] using
appear.
4. Select [FE-8010], [FE-8010 No.1] or [FE-8020 No.2] as appropriate using
the ENT key.
5. Press the DISP key to close the open menus.
2.12

User Reset

You can restore the factory default settings using this menu.
1. Press the MENU/ESC key to open the Main menu.
2. Select [System] using
3. Select [User Reset] using
appear.
4. Select [YES] or [NO] as appropriate using
5. Press the MENU/ESC key twice to close the menu.
or , then press the ENT key.
or , then press the ENT key. A confirmation pop-up window will
or , then press the ENT key.
or , then press the ENT key. A confirmation pop-up window will
or
29
Equipment's unique
serial number
Software program
and version number
, then press the ENT key.
2. SYSTEM MENU
or , then press