How To Find The Chart Type; How To Update Enc, C-Map Charts Manually - Furuno FMD-3200 Operator's Manual

3. HOW TO MANAGE CHARTS
3.20

How to Find the Chart Type

The electronic chart system can display more than one ENC chart cell at a time. This
feature is called multi-cell display. If one ENC chart cell does not cover the whole dis-
play, the system opens more ENC chart cells for display, if appropriate cells for the
displayed area are available. The Own ship functions box shows information about
ENC chart cells displayed on the electronic chart display area. When automatic TM
reset is active, the information is displayed with reference to your ship's position. If TM
reset is OFF, the information is displayed with reference to current cursor position.
Chart type indication
No indication (Official ENC chart)
"Non-ENC data" (Unofficial ENC chart, indication in yellow)
"ENC data available" (Currently, RNC chart is in use, but
ENC material is available. Indication shown in yellow.)
3.21

How to Update ENC, C-MAP Charts Manually

Manual update may include deleting an already existing object, modifying a position
or other characteristics of an already existing object or inserting of a new object. In this
system, manual updates are stored in a common database.
Mariners cannot permanently remove any of the official objects from the chart display.
If a mariner needs to make obsolete any of the official objects he "deletes" them. Then,
in practice, the deleted objects are still visible, but a diagonal line on the object indi-
cates it is a deleted object.
However, a mariner can remove objects that he has inserted himself.
Note that the manual updates have no automatic connection to any automatic update
received later for charts. If a manual update itself became obsolete, because the offi-
cial chart has been updated to include the update defined as a manual update, the
mariner must himself delete the obsolete manual update in question.
The system records complete usage of manual updates. All deletions, modifications
and insertions are recorded and time stamped. If the mariner wishes to see what kind
of manual updates he had in the past, for example, two weeks ago, he uses Update
History to specify the relevant date range. For information on how to set Display date
and Approved until dates, see section 5.2.3.
Note: Do not manually update charts while charts are being synchronized. Wait until
synchronization is completed.
3-26
ENC info
appears here.