Furuno FMD-3200 Operator's Manual page 77

How to install the C-MAP database
1. Insert the medium that contains the C-MAP database.
2. Get into the Chart maintenance mode then click the [AUTO Load] button on the
InstantAccess bar.
The [Install chart data] window appears and shows the percentage of completion,
with digital and analog indication.
To show details during the installation, click the [Show detail] button.
To close the [Message] window, click the [Hide detail] button.
3. When the installation is completed, information about the chart database installed
appears in the [Error/Warning/Guidance] window. Click the [Confirm] button to fin-
ish.
4. If applicable, set the next sequential medium and repeat steps 2-3 to install the
next databases.
Note 1: If, after installation, C-MAP Pro+ charts do not appear, delete all correspond-
ing charts and then reinstall them.
3. HOW TO MANAGE CHARTS
3-11