Appendix 1 Menu Tree - Furuno FMD-3200 Operator's Manual

APPENDIX 1 MENU TREE

Main Menu
General
MENU
bar
(click)
Sensor
(Con't on next page)
Ship
Ship & Route
Parameters
Parameters
Route
Parameters
Instant
Track
* Set at installation
Navigation Parameters (Show forwarding distances, set at installation.)
TCS (Select the ECDIS unit to control Autopilot.)
Cost (Input values for Hour, Heavy Fuel Oil,
Cost
Diesel Oil)
Parameters
Fuel Consumption (Input values for Speed,
Heavy Fuel Oil, Diesel Oil)
System/Local Sensor Type (System Sensor, Local Sensor)
Select
System HDG
SPD
Sensor
Settings
COG/
SOG
POSN
Local Sensor
HDG
Settings
SPD
COG/
SOG
POSN
Other Sensor
Other
Settings
Sensor
Filter Status (Monitors sensor status and integrity.)
MAX Speed (0.1 to 80 kn, 22.1)
MAX Height (0.0 to 100 m, 16.1)
MAX Draught (0.0 to 50 m, 20.0)
Max R.O.T*
WPT Approach*
WPT Prewarning*
Default Line Radius (0.1 to 3.0 NM, 0.8)
Default CH Limit (10 to 1852 m, 185)
Default Safety Margin (0 to 1000 m, 40)
Delay before Initiating First Turn (30 to 600 sec, 60)
Turn Radius (0.02 to 3.00 NM, 1)
Channel Limit for Track Control (Auto, Manual (10 - 1852m))
Route Check Strictly
Data Source (Sensors, Manual)
Stabilization Mode ( Bottom, Water)
Sensor Type (GPS, LOG)
Data Source (Sensors, Manual)
Data Source (Sensors)
Data Source (Sensors, Manual)
Data Source (Sensors, Manual)
Analog Gyro (No use)
Manual
Gyro Correction
Stabilization Mode ( Bottom, Water)
Sensor Type (GPS, LOG)
Data Source (Sensors, Manual, Reference SPD, Drift)
Data Source (Sensors)
Data Source (Sensors, Manual)
Wind Speed (kn, m/s)
Reference (APPARENT (relative, ref. to heading), NORTH (true,
ref. to North), THEORETICAL (true, ref. to heading)
Depth
(Values for Bow, Mid and Aft)
Below
Trans.
Temperature (Temperature of water surface)
Water Current (Course and speed of water current)
AP-1