Furuno FMD-3200 Operator's Manual page 392

APPENDIX 5 ALERT LIST
No. Text
011 RS485 Communi-
cation Timeout
012 No Signal
013 Sentence Syntax
Error
014 Fan1 Rotation
Speed Lowering
015 Fan2 Rotation
Speed Lowering
016 Fan3 Rotation
Speed Lowering
017 Fan4 Rotation
Speed Lowering
018 LCD Unit
Lifetime Over
019 High Temperature
Inside Monitor
020 Fan1 No
Rotation
021 Fan2 No
Rotation
AP-34
Default Meaning
Caution For MU-190/231: Connect-
ed to COM1. There has
been no communication
from processor unit through
RS485 for 180 seconds.
(No communication implies
in completed sentence or
checksum error.)
Caution For MU-190/231: Connect-
ed to COM1. There has
been no signal continuously
for 60 seconds.
Caution For Main monitor, connect-
ed to COM1, value of exter-
nally input sentence is out of
range that defined by sen-
tence.
Caution For MU-190/231: Connect-
ed to COM2 (Sub Monitor).
Fan1 rotation speed is be-
low threshold.
Caution For MU-231: Connected to
COM2 (Sub Monitor).
Fan2 rotation speed is be-
low threshold.
Caution For MU-231: Connected to
COM2 (Sub Monitor).
Fan3 rotation speed is be-
low threshold.
Caution For MU-190: Connected to
COM2 (Sub Monitor).
Fan4 rotation speed is be-
low threshold.
Warning
For MU-190: Connected to
COM2 LCD unit operating
time exceeds 50000 hours.
For MU-231: Connected to
COM2 LCD unit operating
time exceeds 50000 hours.
Warning
Internal temperature
exceeds threshold.
Monitor: Connected to
COM2 (Sub Monitor).
Warning For MU-190/231: Connect-
ed to COM2 (Sub Monitor).
Fan1 rotation speed is be-
low threshold.
Warning For MU-190/231: Connect-
ed to COM2 (Sub Monitor).
Fan2 rotation speed is be-
low threshold.
Remedy
Check the connection of
brightness control cable.
Check the connection of
video cable.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
LCD unit replacement is
required. Contact
FURUNO.
Please turn off monitor.
If the error frequently oc-
curs, contact FURUNO and
inform frequency of occur-
rence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.
If the error frequently
occurs, contact FURUNO
and inform frequency of
occurrence.