Instant Track Parameters - Furuno FMD-3200 Operator's Manual

21. PARAMETERS
21.4

Instant Track Parameters

The instant track feature can create, in route monitoring, a simple route in the following
situations:
• Return to the monitored route when the vessel goes outside the channel limits.
• Temporarily deviate from the monitored route (avoid collision, etc.).
How to set instant track parameters
Set the parameters for the instant track ([MENU][General][Ship & Route Param-
eters][Instant Track] tab).
[Delay before Initiating First Turn]: Set the number of seconds (30 - 600 seconds)
to wait before initiating the first turn in the simple route.
[Turn Radius]: Set the turning radius (0.02 - 3.00 NM) to use between waypoints (four
waypoints) in the simple route.
[Channel Limit for Track Control]: Set the channel limit (10 - 1852 m) for the instant
track, automatically or manually. The [Auto] setting uses the channel limit set for the
monitored route.
[Route Check Strictly]: Check to prevent monitoring of instant track when a chart
alert (alarm or warning) is found through the route check. Uncheck to monitor instant
track in spite of chart alert found through the route check.
21-4