Voyage Data - Furuno FMD-3200 Operator's Manual

14. AIS TARGET FUNCTIONS
14.3

Voyage Data

Before you embark on a voyage, set your navigation status, ETA, destination, draught
and crew, on the [Voyage Data] page in the [NAV Status] menu. The data entered
here is reflected to the AIS transponder.
Note: [Persons], the total number of persons onboard, should be set at the AIS tran-
sponder. Some AIS transponders may not accept this input from the ECDIS.
1. Open the MENU then click both [NAV Status] in the [TT/AIS] menu and the [Voy-
age Data] tab.
2. Click the [Navigational Status] drop-down list then select your navigational status,
from the list below.
• Underway using engine
• At anchor
• Not under command
• Restricted maneuverability
• Constrained by her draught
• Moored
• Aground
• Engaged in fishing
• Under way sailing
• Reserved for high speed craft
• Reserved for wing in ground
• Reserved for future use (x3)
• AIS-SART (active)
• Not defined
3. Enter ship's draught (0.0 - 25.5 (m)) at [MAX Draught].
4. Enter your ETA at [ETA], in UTC.
Day: two digits
Month: Three-character abbreviation
Year: Four digits
5. Enter your destination at [Destination], using a maximum of 20 characters.
6. Click the [Save] button to register the settings. The settings are sent to the AIS
transponder.
14-4