Targets Page - Furuno FMD-3200 Operator's Manual

Tidals: Check to show tidal symbols and tidal data on user charts.
Areas: Check to show areas on the user charts.
Circles: Check to show circles on user charts.
Density: Set the degree of transparency for the user chart objects. Color fill for the
areas can be chosen as transparent from 0%, 25%, 50% or 75%. Select [0%] to show
only boundary lines.
NAVTEX: Check to put the Navtex symbol (
you have received a Navtex message. (Navtex receiver must be enabled during instal-
lation.)
4.3.5

Targets page

Color: Select color of target (TT and AIS, common) from the list box.
TT Size: Select symbol size for tracked targets, Standard or Small.
AIS ROT TAG Limit: Show target turning direction.
TT Label: Show or hide the TT label (target no.).
AIS Label: Show or hide the AIS label (ship's name).
TT Pop-up INFO: Show or hide the TT pop-up, which is shown by right-clicking a TT.
AIS Pop-up INFO: Show or hide the AIS pop-up, which is shown by right-clicking an
AIS target.
TT(04)
COG: 235.0°T
SOG: 6.1kn
CPA: 0.23NM
TCPA: -10:18
TT pop-up info AIS pop-up info
Past position
TT Points: Select the number of TT past position points to display.
AIS Points: Select the number of AIS past position points to display.
Style: Select style of presentation of target's past position.
NAME VOYA...
COG: 324.0°T
SOG: 8.1kn
CPA: 0.12NM
TCPA: -19:18
4. HOW TO CONTROL CHART OBJECTS
) at the position of the ship from which
4-9