Furuno FMD-3200 Operator's Manual page 369

Symbol name and description
Activated AIS targets - true scaled outline
• This can be displayed when based on user selec-
tion either beam width or length is more than 7.5
mm.
• AIS outline: ON/OFF
Activated AIS targets - dangerous targets
Dangerous target symbol is red and it flash until ac-
knowledged.
If both heading and COG are unknown the orienta-
tion is toward top of display.
Activated AIS targets - heading lines
Activated AIS targets - heading lines - turn indica-
tors
APPENDIX 2 ABBREVIATIONS, SYMBOLS
Symbol graphic(s)
Dangerous target
Dangerous target
CPA/TCPA data
with no
AP-11