Assignment Of The Rs 232 Data Interface - sauter FH Series Instruction Manual

Storage of peak values and average value calculation
(from up to 10 measured values)
Storage of the peak values in the measuring instrument
• Activation of the "AUTO PEAK function" via the PEAK button
• Deactivation of the "Average Function" via the MEMORY key
• Now all peak values are automatically transferred to the instrument memory.
• Individual peak values can be recalled using the arrow keys ▲ and ▼ (displayed
in the upper display segment)
• The average value can be called up via the MEMORY button (visible in the upper
display segment)
• Deleting the memory contents by pressing ▼ button in AVERAGE mode

Assignment of the RS 232 data interface

Pin Signal
2 TxD
3 RxD
5 GND
6 +1.6 to + 2 V
7 +1.6 to + 2 V
8 +1.6 to + 2 V
12
SUB-D 9Pin male
Designation
Data output
Input for control
signal
Ground
> upper limit value
< lower limit value
OK
FH-BA-e-2020