KEB COMBIVERT F4-C Applications Manual page 87

Operating and Appliance Displays
In. 2 Max. output frequency
Adr.
2C02h
Display of the maximum possible output frequency in Hz for this inverter. The value range and the resolution depend on
ud.11.
In. 3 Max. carrier frequency
Adr.
2C03h
Display of the maximum possible carrier frequency in kHz for this inverter. The default and maximum values depend on
the power circuit identification (LTK).
In. 4 Software identification
Adr.
2C04h
This parameter contains the code for the software version number and the control hardware.
1st digit:
2nd and 3rd digit:
4th digit:
In. 5 Software date
Adr.
2C05h
Display of the software date. It contains day, month and year, however only the last number of the year is displayed.
Example: Display = 1507.8
date
In. 6 Config-file number
Adr.
2C06h
This parameter serves for the identification of the software used in the control through KEB COMBIVIS. The configuration
takes place automatically at the call of COMBIVIS and connected inverter.
© KEB Antriebstechnik, 1999
All Rights reserved
min max
0 409,5875
min max
1 LTK
min max
0 9999
Control hardware ( 0 = 00.F4, A = 0A.F4, D = 0D.F4 )
Software version ( e.g. 11 = 1.1 )
Special version ( 0 = Standard)
min max
- -
= 15.07.98 / 15th July 1998
min max
Software Software
Name: Basis
KEB COMBIVERT F4-C
Functional Description
Hz
0,0125 409,5875
kHz
1
-
1
-
0,1
-
1
Date
09.04.99
ANTRIEBSTECHNIK
default
default
LTK
default
-
default
-
default
-
Chapter Section Page
17
6 1 17
6