KEB COMBIVERT F4-C Applications Manual page 157

1. Introduction
2. Summary
3. Hardware
4. Operation
5. Parameter
6. Functions
7. Start-up
8. Special Operation
9. Error Assistance
10. Project Planning
11. Networks
12. Applications
13. Annex
© KEB Antriebstechnik, 1997
All Rights reserved
6.1 Operating and Appliance
Display
6.2 Analog In- and Outputs
6.3 Digital In- and Outputs
6.4 Set Value and Ramp
Adjustment
6.5 Voltage/Frequency (U/f)
Characteristic
6.6 Motor Presetting
6.7 Keep on Running Functions
6.8 Parameter Sets
6.9 Special Functions
6.10 Encoder Interface
6.11 PI-Controller
6.12 CP-Parameter Definition
Name: Basis
KEB COMBIVERT F4-C
Functional Description
6.8.1 Non-programmable
Parameters ............................. 3
6.8.2 Copying of Parameter Sets .... 3
6.8.3 Selection of Parameter Sets ... 4
6.8.4 Locking of Parameter Sets ..... 6
6.8.5 Parameter Set ON and OFF
Delay ...................................... 4
6.8.8 Used Parameters ................... 6
Date
29.01.98
ANTRIEBSTECHNIK
Chapter Section Page
6 8 1