KEB COMBIVERT F4-C Applications Manual page 85

Operating and Appliance Displays
ru.45 Display analog option
Adr.
202Dh
This parameter displays the percentual value of the signal at the optional analog input.
-10V...0...+10V = -100%...0...100%
ru.46 Ramp output frequency
Adr.
202Eh
This parameter displays the frequency at the output of the ramp generator. If the internal PI-controller is not active, the
displayed frequency corresponds to the output frequency ru.3.
ru.47 Actual frequency encoder
Adr.
202Fh
The displayed value depends on cn.3.
cn.3 = 0 (default) The actual frequency of ru.3 is displayed.
cn.3 = 1 or 2 The current actual frequency of the encoder interface (option) is displayed. This measured value
corresponds to the real slip-afflicted actual speed.
1: channel 1
2: channel 2
A counter-clockwise rotating field (reverse) is represented by a negative sign. Precondition is the correct phase connection
of the motor.
For a closed-loop-controlled system it is imperative to ensure the correct correct phase connection, otherwise
the controllers would run into their limit.
© KEB Antriebstechnik, 1999
All Rights reserved
min max
-100 100
!ud.11!
min max
-409,58 409,58
!ud.11!
min max
-409,58 409,58
Name: Basis
KEB COMBIVERT F4-C
Functional Description
%
0,1
ud.11
Hz
0,0125
ud.11
Hz
0,0125
Date
09.04.99
ANTRIEBSTECHNIK
default
-
default
-
default
-
Chapter Section Page
15
6 1 15
6