KEB COMBIVERT F4-C Applications Manual page 84

Functional Description
ru.33 Display counter A
Adr.
2021h
The counter content of the free-to-program counter A is displayed, alternatively in seconds or hours (see LE.47). The
counter can be adjusted to any chosen value by means of keyboard or bus. The programming of the counter is done
with the parameters LE.41...LE.47.
ru.34 Motorpoti - current value
Adr.
2022h
The motor-poti function in the KEB COMBIVERT simulates a mechanic, motor-driven potentiometer. The triggering is
done over 2 programmable inputs („Poti up" and „Poti down"). The display (-100...100%) relates to the fixed limits
(oP.4...oP.7). In addition to the inputs the motor-poti can also be triggered with the keys „UP" and „DOWN". By bus the
motor-poti can be set to any chosen value between -100...100%. The adjustment of the motor-poti is done with the
parameters oP.26...oP.29.
ru.41 Analog output 1 display
Adr.
2029h
This parameter shows the percentual value of the output signal at the analog output AOUT (terminal X1.15). An output
signal of 0...10V corresponds to 0...100%.
ru.43 Programmable display
Adr.
202Bh
Contrary to the fixed defined indications, this display is free for own definitions. Thus a customer-specific value (e.g.
bottles/min) can be displayed. The definition is done with ud.87...ud.91.
ru.44 Carrier frequency display
Adr.
202Ch
Displays the current operating frequency of the inverter.
Chapter Section Page
6 1 14
min max
0 327,67
min max
-100 100
(terminal X1.15)
min max
0 100
min max
-32767 32767
min max
1 16
Date Name: Basis
09.04.99 KEB COMBIVERT F4-C
Operating and Appliance Displays
s / h
0,01
%
0,01
%
0,1
-
-
kHz
1
© KEB Antriebstechnik, 1999
All Rights reserved
default
-
default
0
default
-
default
-
default
-