Groin Strap; Neck Support - Otto Bock Kimba Neo Instructions For Use Manual

Installing options/accessories

7.3.7 Groin strap

49
1 Underside groin strap
2 Attachment strap with loop
3 Free belt end for length adjustment
Mounting the groin strap
1) Place the groin strap, underside (1) down, on the seat padding; the attachment strap with the loop (2) must
face backwards.
2) Run the attachment strap with the loop (2) between the backrest and seat surface and secure it under the seat
bottom (see fig. 51). Use the screws / wing nuts to adjust the depth/width of the seat (see fig. 51, item 1).
3) Rivet the clips to the holes of the bottom back plate (see fig. 50, item 1; see fig. 51, item 2).
4) Run the belt ends of the long attachment strap (4) around the backrest and secure them in the clips (see
fig. 51, item 3).
5) If necessary, cut off protruding belt ends of the long attachment strap (4) and melt the free ends by applying
heat (e.g. with a lighter).
50

7.3.8 Neck support

1) Determine the medically required position of the neck support.
26
4 Long attachment strap
5 Strap adjustment/plug connection
6 Leg strap
51
Kimba Neo