13
7.2.2 Lap belt with metal buckle
15
1 Adjustment buckle
2 Belt restraint
Mounting the lap belt
1) Press the adjustment buckle together and pull out the belt (see fig. 16, item 1).
INFORMATION: Make sure not to push the plastic part beyond the guidance in the metal part.
2) Pull the belt out of the belt restraint (see fig. 16, item 2).
3) Pull out a belt pad (3). The belt is now ready for installation (see fig. 17).
4) Place the belt on the seat. Take the belt end (see fig. 18, item 1) and guide it between the seat surface and hip
pad to the outside of the seat (see fig. 18, item 2).
5) Guide the belt end through the large holes in the base frame (see fig. 18, item 3; see fig. 19, item 1).
6) Guide the belt end to the front between the seat surface and hip pad (see fig. 19, item 2).
7) Thread the belt pad (3) and the belt restraint (2) onto the belt.
8) Thread the belt end through the adjustment buckle (see fig. 16, item 1).
→ If the belt buckle (4) can be closed while being in the centre of the seat, the lap belt has been installed prop
erly.
Kimba Neo
14
3 Belt pads
4 Release button/belt buckle
Installing options/accessories
13