Adjusting The Fixation Vest; Adjusting The Groin Strap; Adjusting The Pelvic Band; Adjusting The Neck Support - Otto Bock Kimba Neo Instructions For Use Manual

Settings

8.4.4 Adjusting the fixation vest

INFORMATION
The application of the product is described in the Instructions for Use (User).
The chest and shoulder support can be adjusted as follows:
• Moving the belts in the 2 pairs of clips on the back plate (see fig. 45, item 2/3)
• Moving the belts in the sewn-on clips of the chest and shoulder support (see fig. 43, item 5).

8.4.5 Adjusting the groin strap

INFORMATION
The application of the product is described in the Instructions for Use (User).
The groin strap can be adjusted as follows:
• Moving the belts in the 2 clips on the back plate (see fig. 51, item 2/3)
• Moving the belts in the strap adjustment at the leg straps (see fig. 49, item 5/6)

8.4.6 Adjusting the pelvic band

INFORMATION
The application of the product is described in the Instructions for Use (User).
The pelvic band can be adjusted as follows:
• Moving the supports on the crossbar (see included Instructions for Use 647G129)
• Sliding the band onto the plastic mounting rails (see included Instructions for Use 647G129)

8.4.7 Adjusting the neck support

The adjustments are made when the option is installed (see chapter "Preparation for Use" > "Installing
Options/Accessories").

8.4.8 Adjusting the lumbar pad

The adjustments are made when the option is installed (see chapter "Preparation for Use" > "Installing
Options/Accessories").

8.4.9 Adjusting the hook-and-loop foot straps

INFORMATION
The application of the product is described in the Instructions for Use (User).
The hook-and-loop foot strap can be adjusted as follows:
• Moving the hook-and-loop foot straps against each other (no illustration)

8.5 Adjusting the footrest

8.5.1 Adjusting the footplate height

Standard footrest
1) Loosen the Allen head screws (see fig. 86, item 1).
2) Adjust the footrest height (lower leg length).
3) Retighten the Allen head screws.
Asymmetrical footrest
This option can also be rotated to shorten the lower leg length:
1) Loosen the Allen head screws (see fig. 87, item 1).
2) Pull the footrest down and off and rotate it (see fig. 88).
3) Adjust the footrest height (lower leg length).
4) Retighten the Allen head screws (see fig. 88, item 1).
36 Kimba Neo