Adjusting The Footplate Angle; Further Settings - Otto Bock Kimba Neo Instructions For Use Manual

86
88

8.5.2 Adjusting the footplate angle

1) Loosen the fastening nuts of the locking screws in the slotted holes (see fig. 89, item 1).
2) Move the locking screws. Pay attention to the setting, so that a parallel adjustment is assured.
3) Align the wide slots of the locking screws perpendicular to the slotted holes in the footrest, so as to ensure
wear-free locking.
4) Tighten the fastening nuts of the locking screws again.
89

8.5.3 Further settings

The following fitting tasks are described in more detail in the included Instructions for Use (User) – reference num­
ber 647G892:
• Adjusting the knee angle
Kimba Neo
87
Settings
37