Five-Point Belt - Otto Bock Kimba Neo Instructions For Use Manual

7.2.6 Five-point belt

30
1 Clip with rivet
2 Shoulder belt, left/right
3 Belt pads
4 Strap guide with attachment fitting
5 Lap-belt part, left/right
Installation start
1) Mount the loose strap guide on the right (4) according to the section "Strap guide" (see Page 12).
2) Rivet 2 clips (1) to the holes of the bottom back plate (see fig. 28, item 2).
3) Run the shoulder belts (2) through the padding / back plate (see fig. 29) and secure them in the clips (see
fig. 28, item 3).
Mounting the lap-belt part (5)
1) Run the lap belt on the right (5) between the seat and the backrest through the half-moon-shaped connecting
piece to the back, through the strap guide and let it hang (see fig. 31).
2) Mount the fixed strap guide (6) according to the section "Strap guide" (see Page 12).
3) Run the lap belt on the left (5) between the seat and the backrest through the half-moon-shaped connecting
piece to the back (##01680).
4) Thread on the belt restraint (7).
5) Run the lap belt on the right (5) behind the seat through the adjustment buckle (8) and, to complete, through
the belt restraint (7) (see fig. 32 – see fig. 34).
For pressing together/threading through the adjustment buckle: see Page 13.
Kimba Neo
6 Strap guide, fixed
7 Belt restraint
8 Adjustment buckle
9 Crotch belt with buckle and adjustment buckle
10 Stop plate
Installing options/accessories
19