Groin Strap - Otto Bock Kimba neo Instructions For Use Manual

The rehab buggy can be equipped with a fixation vest that secures the trunk in the seat for certain indications (see
Fig. 59). The fixation vest does not provide any support for the pelvis.
Adjusting the fixation vest
The adjustment of the final belt tension takes place when putting it on by adjusting the belt length at the six clip
buckles on the back of the seat (see Fig. 60).
Putting on the fixation vest
1) Unfasten the hook-and-loop tabs over the zipper (see Fig. 59, item 1).
2) Unzip the zipper (see Fig. 59, item 2).
3) If needed: Before putting the user into the seat, unfasten the clip buckles at the back of the seat and pull the
belt straps of the fixation vest forward somewhat (see Fig. 60).
4) Sit the user into the seat. Make sure that the user's back is up against the backrest padding.
5) Close the zipper (see Fig. 59, item 2).
6) If needed: Tighten the belt straps in the clip buckles at the back of the seat (see Fig. 60, item 3) and fasten
them.
7) Close the hook-and-loop tabs over the zipper (see Fig. 59, item 1).
INFORMATION
In daily use, the fixation vest can also be put on/removed by opening/closing the clips on the front (see Fig. 61,
item 1/2).

6.8.7.6 Groin strap

INFORMATION
For further information, please see the instructions for use included with the product.
The rehab buggy can be equipped with a groin strap that secures the pelvis in the seat for certain indications (see
Fig. 62).
Kimba neo
59
61
Usage
60
Ottobock | 31