Four-Point Children's Lap Belt - Otto Bock Kimba Neo Instructions For Use Manual

Installing options/accessories

7.2.4 Four-point children's lap belt

24
1 476P52=SK005 four-point children's lap belt
2 Upper belts (see below)
3 Support straps (see below)
Mounting the four-point children's lap belt
1) Mount the 3-slot mounting brackets (5) in the holes in the seat plate of the base frame. Insert the screws from
the bottom to the top (see fig. 25, item 1).
INFORMATION: It should be possible to turn the 3-slot mounting brackets with some resistance if
needed.
2) Turn the 3-slot mounting brackets (5) outwards so that the belt straps can be threaded through (see fig. 25).
3) Place the four-point children's lap belt on the seat.
4) Guide the upper belts (2) sideways under the hip pads (see fig. 26, item 1).
With adjustable armrests: Guide the upper belts (2) behind the armrest attachment (see fig. 26).
5) Guide the support straps (3) sideways under the hip pads a few centimetres in front of the upper belts as
well (not illustrated).
With adjustable armrests: Route the support straps (3) in front of the armrest attachment (not illustrated).
6) Now thread the belt ends into the 3-slot mounting brackets, adjust the length and pull them tight. For belt
placement: see fig. 23.
INFORMATION: First guide the belt ends into the outer slot from inside to outside.
7) If necessary, cut off protruding belt ends and melt the free ends by applying heat (e.g. with a lighter).
16
4 Mounting material
5 3-slot mounting brackets, 50 mm
Kimba Neo