Lumbar Padding; Hook-And-Loop Foot Straps - Otto Bock Kimba Neo Instructions For Use Manual

2) Thread the neck support through the back padding and the back plate.
3) Adhere the two hook-and-loop straps for securing the neck support to the back plate. Do this flexibly, accord­
ing to the installation situation.
4) Secure the neck support firmly.
52
54

7.3.9 Lumbar padding

1) Open the zip on the back padding and fold the back padding forward.
2) Determine the required position of the lumbar padding.
3) Adhere the supplied hook-and-loop straps for securing the lumbar padding to the back plate (see fig. 56) or
use the existing hook-and-loop straps.
4) Secure the lumbar padding.
5) Pull the back padding with its cap over the back insert and close the zip.
56

7.3.10 Hook-and-loop foot straps

Attach the hook-and-loop foot straps to the heel part of the footplate with two rivets or screws positioned beside
one another. The holes must be inserted in the footplate accordingly.
In addition, hook-and-loop foot straps can also be used for the forefoot area.
Kimba Neo
53
55
Installing options/accessories
27