Positioning Aids; Thoracic Supports; Abductor - Otto Bock Kimba Neo Instructions For Use Manual

7.3 Positioning aids

CAUTION
Lack of instruction
Injuries, malpositions, illness of the user due to information errors
► The qualified personnel is responsible for making sure that the user and/or attendant/nursing staff has under­
stood the proper adjustment, use, maintenance and care of the belt system.
► In particular, ensure that the user and/or attendant/nursing staff knows how to quickly loosen and open the
product to avoid delays in case of emergency.

7.3.1 Thoracic supports

1) Run the proper sides of the thoracic pads through the padding.
INFORMATION: For folding thoracic pads only: The red release button on the folding thoracic pad can
point upwards or downwards. We recommend that the release button face upwards so it is easier to
use.
2) Put the mounting screws through the slotted hole in the thoracic pad and the back insert (see fig. 37, item 1;
see fig. 38, item 1).
3) Fasten the thoracic pads on the back of the back insert using knurled nuts.
4) If necessary, adjust the width/height. Hand-tighten the knurled nuts.
37

7.3.2 Abductor

1) Place the abductor in the desired position on the seat plate (see fig. 39, item 1) and fasten it loosely with
screws from below (see fig. 40, item 1).
INFORMATION: When using a slip sack, make a cut in it in the specified spot (see Page 29), insert the
slip sack and loosely fasten the abductor with screws.
2) Adjust the depth of the abductor in the slotted hole if necessary.
3) Now fasten the abductor with screws.
39
Kimba Neo
38
40
Installing options/accessories
21