Groin Strap - Otto Bock Kimba neo Instructions For Use Manual

5.2.3.5 Groin strap

1 Underside groin strap
2 Attachment strap with loop
3 Free belt end for length adjustment
Mounting the groin strap
1) Place the groin strap, underside (1) down, on the seat cushion; the attachment strap with the loop (2) must
face backwards.
2) Run the attachment strap with the loop (2) between the back support and seat bottom and secure it under the
seat bottom (see Fig. 35). Use the screws/knurled nuts to adjust the depth/width of the seat (see Fig. 35, Pos.
1).
3) Rivet the clips to the holes of the bottom back plate (see Fig. 34, Pos. 1; see Fig. 35, Pos. 2).
4) Run the belt ends of the long attachment strap (4) around the back support and secure them in the clips (see
Fig. 35, Pos. 3).
5) If necessary, cut off protruding belt ends of the long attachment strap (4) and melt the free ends by applying
heat (such as from a lighter).
Kimba neo
31
4 Long attachment strap
5 Strap adjustment/plug connection
6 Leg strap
Preparation for Use
32
33
Ottobock | 19