Canopy Adapter; Rain Cover; Summer/Winter Slip Sack - Otto Bock Kimba Neo Instructions For Use Manual

6) For mounting the tray with the user seated, please see the instructions for use (user) – reference number
647G892.
60

7.7 Canopy adapter

INFORMATION
The canopy adapter is used for the subsequent installation of the canopy to a multifunctional seating unit. For
information on this, see the Instructions for Use (User) - reference number 647G892.
1) Loosen the set screws at the back tube (see fig. 62, item 1) and pull the back insert up.
2) Slide the canopy adapter with the proper side onto the backrest bar (see fig. 63).
3) Pre-position the canopy adapter in a level manner (see fig. 63).
4) Tighten the set screws of the canopy adapter again.
5) Put on the back insert and tighten again the set screws at the back tube.
62

7.8 Rain cover

For mounting information, see the Instructions for Use (User) - reference number 647G892.

7.9 Summer/winter slip sack

NOTICE
Incorrect attachment
Damage to the product
► During the attachment, make sure that the product cannot grind against the wheels.
1) When needed, make a cut in the slip sack for putting through the lap belt (see fig. 64, item 1), the
abductor/five-point belt (see fig. 64, item 2) or the groin strap (see fig. 64, item 3). Use the provided positions
with the applied leather applications for this purpose.
2) Fasten the attachment cords depending on the attachment situation:
→ Back: e.g., at the seat plate (see fig. 65, item 1)
→ Front: e.g., at the footrest tube (see fig. 65, item 2)
Kimba Neo
61
63
Installing options/accessories
29