Safety Belts; Strap Guide - Otto Bock Kimba Neo Instructions For Use Manual

Installing options/accessories
9
11

7.2 Safety belts

CAUTION
Incorrect approach to the adjustment process
Injuries, malpositions, illness of the user due to adjustment errors
► The belt system may only be installed by qualified personnel.
► The qualified personnel is responsible for individual positioning and fitting of the belt system.
► Excessively tight adjustment of the belt system may lead to unnecessary pain or illness of the user.
► Adjusting the belt system too loosely can cause the user to slide into a dangerous position. In addition, the
fastening snaps could open unintentionally if they slide against hard parts of clothing (e.g. buttons).
► For proper installation and adjustment, follow the instructions for use included with the product.

7.2.1 Strap guide

For improved belt guidance in the pelvic area, strap guides must be installed in the following cases:
• Lap belt; lap-belt part of the four/five-point belt: installation position see fig. 13, item 1.
1) Put on the strap guide from the inside, connecting the flat side to the fastening point of the seating unit (see
fig. 14, item 1).
2) Put the mounting screw through the fastening point from the outside (see fig. 14, item 2) and screw it into the
strap guide.
3) Pre-mount the strap guide with the washer/cap nut.
4) Twist the strap guide in the direction of use and finish assembly (see fig. 13).
12
10
12
Kimba Neo