Figure 7-1: Main Window
7.4.2
Measurements
After pressing the button Read Values the current Count rate,
dose rate and dose are displayed in this frame.
With button Start the measured value is read from the unit at a
certain polling interval. Use the scroll bar to define the polling
interval. You can select a value between 1 and 3600 seconds.
The dose rate can be displayed numerically and graphically.
Click on the Graphics.... A diagram is displayed that gives a
representation of the dose rate values versus the time.
7-6
DB-067 E
RadEye G20
Iw/Tr/Ff 26.11.2012