7.5.6
Bluetooth
Figure 7-11: Bluetooth
Here the user may configure the BTcom battery cover. The
frame "Device" informs about firmware version, serial number
and the physical address of the BTcom cover (not the RadEye
B-20!).
The Parameter "Blue LED on" relates to the blue LED at the
backside of the battery cover that shows the connection status.
Setting "Power off at battery low" the BTcom cover powers
off automatically if battery low status is detected to increase
battery life. "Secure connection" uses the PIN code that can
be edited in the right field.
With "Autoconnect" the BTcom cover connects automatically
to another paired BTcom cover. In this state, the BTcom cover
cannot be connected with the PC.
For more information please read the manual which is deliv-
ered together with the BTcom cover.
RadEye G20
DB-067 E
7-17
Iw/Tr/Ff 26.11.2012