Table of Contents
Advertisement
3.4
Alarm thresholds
There are two alarm thresholds each allocated to dose rate and
dose.
In order to avoid dose alarms while using the instrument exclu-
sively as a rate meter, the dose alarms can be set to the maximum
level.
Configuration of the alarms is possible via infrared interface or
via the menu.
As to the alarm activation, please also read chapter 4.2.
3.5
Setting alarm thresholds
The menu options
and
allow
Rate
Alarm Dose
Alarm Dose
the alarm thresholds to be modified. For this setting, the user has
255 seconds time. Changing the value is effected by pressing the
"◄/Menu" (Change) button if the corresponding "Alarm" is se-
lected:
To increment the number press the "▲/▼" arrow keys. To go on
to the next digit or to quit the edit mode, menu use "◄/►" keys.
Once the last number has been set, quit the editing mode by press-
ing the "Exit"-key. Then, the value set is saved and after 10s the
unit returns to the basic display.
3-10
DB-067 E
RadEye G20
Iw/Tr/Ff 26.11.2012
Hide quick links:
Advertisement
Table of Contents
