6.2
Failure indication
In case of a failure the beeper generates a sharp single pulse every
32 s.
The corresponding failure message is displayed in the LCD:
6-2
Error high voltage generation
No detector pulse within 128 seconds
EEPROM with calibration data shows
EEPROM Read or EEPROM Write
error.
A Watchdog Error indicates, that the
micro controller has problems to work
on it's tasks in a given timeframe.
Reasons are strong electromagnetic
pulses, firmware errors or hardware
issues.
The BTcom cover failed to initialize
the Bluetooth module
DB-067 E
RadEye G20
Iw/Tr/Ff 26.11.2012