2.2
Inserting the batteries
The two AAA-Alkaline cells as delivered with the instrument
allow about to 900 h with RadEye G20/G20-10 respectively
700h with RadEye G20-ER/G20-ER10 of normal operation.
AAA size rechargeable batteries can be used as well.
• Switch off the measuring instrument.
• Remove rubber sleeve.
• Open the cover of the battery compartment.
Use of a coin is recommended.
• Exchange the batteries according to the shown polarity.
• Close the compartment cover hooks first, care for the rubber
seal being in its groove.
• Switch on the unit again. (see chapter 2.4)
The instrument continues working in the operating mode set last
(see chapter 3.2).
2-2
DB-067 E
Iw/Tr/Ff 26.11.2012
RadEye G20