Installation Of The Optional Radeye.exe Software; Starting The Program; Radeye G20 Device Parameters - Thermo Scientific RadEye G20-ER Operating Instructions Manual

7.3 Installation of the optional RadEye.EXE soft-
ware
Open the file "Setup.EXE" on the optional RadEye.EXE
Software installation CD Rom and follow the installation
guideline. The installation generates a RadEye.EXE Icon on
the desktop.
7.4

Starting the program

The icon can be used to start the software RadEye.exe by dou-
ble click.
Once the RadEye.EXE program has been started, device pa-
rameters are displayed on the screen.
7.4.1

RadEye G20 Device Parameters

The Frame "RadEye G20" contains the unit's serial number
and version number of the software. Click on the Read button,
the Parameters of RadEye G20 will be read out from device
and shown in the Frame.
RadEye G20
Iw/Tr/Ff 26.11.2012
DB-067 E 7-5