The RadEye car- and wall holder combines several functions.
(1) Mechanical holding device for instruments of the Rad-
Eye-family
(2) Accumulator charger unit with temperature controlled
charging of NiMH accumulators in the device
(3) Infrared interface for direct connection to the serial inter-
face of computers
(4) Alarm contact for connecting alarm indicators up to a
power of 24W (at 24V, see RadEye area monitor
42506/80)
Before plugging the RadEye into the Car holder the rubber pro-
tection plug at the phone jack has to be opened:
Carefully remove the protection sleeve and open the phone jack
Remount the protection sleeve (see chapter 2.3). A small screw
driver for the protection plug might be helpful. The phone jack
must left be open, and the protection plug must be perpendicular
to the protection sleeve.
RadEye G20
Iw/Tr/Ff 26.11.2012
DB-067 E
11-7