Technogym Synchro Excite 500SP Service Maintenance Manual page 93

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Replace the receiv er
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
Check the earthing of the machine using a tester to measure the resistance between the ground
(1)
pin on the power supply cable and the ground node to which the receiver is connected inside
the display. The value must be less than 1 Ω (Ohm).
For machine positioning layouts, use the following diagram as a reference.
(2)
A
Is the transmitter in good
working order?
YES
Is the transmitter alway s within
the 90 cm range f rom the receiv er
5
NO
YES
NO
Use a correctly
f unctioning transmitter
Reposition the transmitter
within range
Page 6.39