Technogym Synchro Excite 500SP Service Maintenance Manual page 189

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
Tap the centre of the + which appears on the screen, using an object that is pointed but not sharp.
The procedure must be repeated three times, with the + appearing in three different positions.
At the end, the message "Calibration successful" will appear if the procedure was correctly
carried out, or "Calibration incomplete" if the procedure was not completed properly, after which
the machine reverts to standby mode.
During the machine power-up sequence, while the message showing the installed software
version is scrolling, pressing any point on the touch-screen for more than 6 seconds will
automatically invoke the calibration procedure as soon as the software version display finishes.
Upon exiting the calibration procedure (successfully or unsuccessfully), the machine
automatically reverts to the standby state.
Page 9.49