Tgs Com Test - Technogym Synchro Excite 500SP Service Maintenance Manual

6.1.4. TGS COM T
The test checks the communication with the TGS reader. The test can have two outcomes:
• "Test Successful": This means that the test was completed successfully, i.e. that serial
communications on the selected port are correct.
• "Error COM3": This means that the outcome of the test was negative.
The "TGS COM test" done on machine not provided with the key reader gives a fail
outcome.
6.1.5. DVT B
OARD
It's a command that allows to divert the serial communication, usually between the Digital TV
boardand the CPU board, on the external CSafe port.
This function wich allows to connect an external device to the Digital TV board is not used at the
moment.
Once the function has been launched it is necessary to switch off and switch on again the
machine to reinstate the correct connection.
Pagina 6.4
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
EST
TEST