The Speed Signal Is Incorrect - Technogym Synchro Excite 500SP Service Maintenance Manual

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0

6.12. THE SPEED SIGNAL IS INCORRECT

The speed signal is incorrect if:
• The brake disk is incorrectly fixed to the flywheel;
• The speed sensor is defective;
• The brake board is defective.
Def ectiv e SW
Follow the procedure step by step to correctly diagnose the problem. Take particular care with the
checks highlighted by circled numbers, which are described in detail below:
THE SPEED
SIGNAL IS
INCORRECT
Carry out the Standard Setting
procedure
YES
Does the speed sensor send
the correct signal to the brake
board?
YES
YES
Update the brake board SW.
Is the speed signal correct?
1
2
NO
Replace the
speed sensor
(generator on SP models)
3
NO
Replace the Brake board
Page 6.31