Technogym Synchro Excite 500SP Service Maintenance Manual page 180

B. To tune and memorise Analogue TV channels, proceed as follow
To transfer TV channels tuning data from a machine to another one, please refer to paragraph
9.8. "Transferring the tuning data"
WARNING: If there are problems with the digital signal reception, check the aerial antenna
connection.
Pagina 9.40
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
1. Press ANALOGUE SEARCH. In this phase, a temporary list of TV
channels found, will be stored and visualized in column 1.
2. Wait the search stops or stop it by pressing STOP SEARCH key. The
channels found in the meantime can be memorised.
3. Use the
through the pages with the channels found during the search, while use
the keys under the list of numbers in column 2, to scroll
through the pages with the numbers and names associated to the channels.
4. Select the channel frequency between the ones visualized in column 1 (it
will be displayed), then press the number that you want to associate it
with, in column 2.
5. An alphanumeric keypad is displayed, to associate a name to the
memorised channel.
6. Press the ENTER (↵) key: the keypad will disappear and the name will
be displayed next to the number.
If a channel has already been memorised under that number, the old
channel will be overwritten with the new one.
7. Repeat the procedure above for each channel you want to memorise.
8. In this way the channels will remain in the memory until the equipment is
switched off (RAM memory); to permanently memorise the changes (in
EPROM) press SAVE IN EPROM key.
9. Exit with "HOME" key.
keys under the list of channels in column 1, to scroll