Brake Winding Position - Technogym Synchro Excite 500SP Service Maintenance Manual

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0

8.3. BRAKE WINDING POSITION

Figure 8.3-1
Carry out the operations
paragraph: 7.7.1. "Rear guard".
1. Back off the 2 screws (a) and position the
brake winding support so that it is centred on
the copper disk, using a 1mm thickness
gauge.
2. Lock the screws back down.
described in
Page 8.3