Display Boards Disassembly; And 500Sp Version - Technogym Synchro Excite 500SP Service Maintenance Manual

7.2. DISPLAY BOARDS DISASSEMBLY

7.2.1. 500 500SP V
AND
Figure 7.2-1
Figure 7.2-2
Figure 7.2-3
Pagina 7.4
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
ERSION
Carry
paragraphs: Errore. L'origine riferimento non
è stata trovata."Errore. L'origine riferimento
non è stata trovata.".
Then place the display on a work bench. It is
now possible to disassemble its circuit boards:
Display Board (A):
1. Disconnect connectors (a) [CN2] of the
2. Back off the 5 screws (c) with a medium
3. Remove the circuit board.
CSafe Board (B):
1. Disconnect connector (d) [CN8] of the C-
2. Remove the circuit board (e), slipping it off
To reassemble the circuit boards, carry out the
out the operations
•
The Display Board (A);
•
The C-Safe Board (B).
keyboard and (b) [CN8] of the CSafe board
from the Display board.
Phillips screwdriver.
Safe from the Display board.
from the top.
Use again the hot glue to fix the
connectors, where necessary.
above steps in reverse order.
described in