Cable For Exchanging Tv Channel Tuning Data Between Two Machines - Technogym Synchro Excite 500SP Service Maintenance Manual

SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
4.3. CABLE FOR EXCHANGING TV CHANNEL TUNING DATA
BETWEEN TWO MACHINES
The link for transferring the TV channel tuning data from one machine to the other is effected via a
special cable, which plugs into the RJ45 connectors of the CSafe boards.
The cable to use (code 0WC00644AA) must be wired as follows:
CSafe Board;
RJ45
3
4
7
8
WARNING: for the numbering of the pins, on RJ45 connector, please refer to the diagram
below:
Cable CSafe Periferic
Signal
Tx
Rx
Digital Ground
Ground Shield
Colour CSafe Board;
RJ45
White
Brown
Green
Yellow
4
3
7
8
Page 4.3