6.6. NO TV PICTURE
Check that the machine is connected to an antenna signal
This error can be due to an incorrect machine configuration, or to problems with the antenna signal.
ATTENTION - ONLY FOR JAPAN: Before to carry out the following troubleshooting, check
that the B-CAS card is correctly inserted on the TV Digital Board.
Pagina 6.18
SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
NO TV PICTURE
On the other machines y ou see
the TV?
YES
Check if the antenna cable is
properly connected
YES
Connect the machines at one
antenna soket sure working.
A
NO
Check the antenna
signal.
1
NO
Connect the cable
NO
Replace the antenna
soket
Continued on the following page