SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
9.2.14. F
P&P
ORMAT
This function formats a TGS key for Plug&Play mode operation. To select the function, when the
display shows:
FORMAT P&P
press ENTER to confirm, or cancel by pressing the CLEAR key for a few seconds.
At the end of the configuration procedure, hold down the CLEAR key for a few seconds to exit.
The CLEAR key can be pressed at any time to interrupt the procedure and revert to standby mode.
9.2.15. SN
This parameter shows the serial number of the machine.
SN:xxxx
Pagina 9.12