SYNCHRO EXCITE Class & Trend: Service & maintenance manual - rev. 2.0
7.7.3.
F
RONT GUARDS
Figure 7.7-8
Figure 7.7-9
Figure 7.7-10
1. Working inside the front guard, back off the
screw (l) on each side of the machine, using a
Phillips screwdriver.
2. Remove the guard (n) by pushing the tabs in
the direction indicated by the arrows, and
simultaneously lifting it upward.
3. Back off the screws (o) on either side of the
machine using a 4mm hexagonal wrench.
Continued on following page
→
Page 7.21